This wireless charger has a built-in fan that can actively dissipate heat during wireless charging. In addition, the vertical body design allows it to reduce the space occupied by the desktop and can be used as a mobile phone holder. The 40W wireless charging power also brings the user experience to a higher level, which will soon make the mobile phone fully Charged.
一、Packaging Overview
The packaging box is white and the design is relatively simple. The MEIZU brand, the appearance and name of the wireless charger are printed on the front.
Meizu’s wireless charger is composed of a base and a mobile phone support plate. The front of the support plate is made of ABS tempered glass, which is very smooth. The support plate and the side of the base are decorated with sandblasted silver-gray paint.
There are two vortex patterns on the front of the support plate, indicating the wireless charging area, and the mobile phone can be wirelessly charged horizontally and vertically.
The bottom air outlet takes away the heat generated during the wireless charging process through the air duct, and there is also a baffle at the bottom to prevent the phone from slipping off.
The MEIZU brand is printed on the front of the base, and there is an LED charging indicator.
Wireless charging supports foreign object detection, and the indicator light turns red to indicate.
Wireless charging is performed normally, and the indicator light is green.
Printed Specification
Model：WP03
Input：5-20V3A Max
Power：40W
USB-C Interface Charging Port on the bottom
There are non-slip rubber pads on the four ends of the bottom, and an air inlet window in the center.
Bottom Length is 75.2mm。
Width: 75.3mm
N.W. : 161g
二、Dismantlement
Tear off the non-slip mat, there are encapsulating screws hidden inside.
Remove the two screws to open the bottom shell. The fan is fixed with a buckle, and there is a white plastic plate between the fan and the PCB for isolation.
The isolation plastic board and the PCB board are also fixed with two screws. There are no components on the back of the PCB board, and the two capacitors on both sides are hollowed out.
The fan, the small LED indicator board and the PCB board are assembled and connected by connectors.
There are two indicator lights on the small LED light board, which are used for foreign body detection and charging prompt respectively.
There is a piece of highland barley insulation paper at the welding place of the wireless charging coil.
Remove the PCB board, the mobile phone support board and the base shell are connected and fixed by screws.
The support plate of the mobile phone can be separated by removing the screws.
An iron block configuration is fixed on the base shell, and three highland barley insulation papers are pasted.
The support board has built-in dual wireless charging coils, and both are equipped with thermistors for temperature monitoring.
There is double-sided tape inside the magnetic conductive sheet to help fix it.
Thermistor Picture.
After all the dismantling is complete, let’s take a family portrait.
WOKOO DESIGN Disassembly Summary
Meizu’s vertical wireless supercharger WP03 has a gray-white design and a very simple style. Compared with the previous generation WP02, both the shape and the power have been greatly changed. First of all, the vertical base body allows the Meizu 18 Pro to receive messages or watch dramas while charging. The 40W wireless charging power is comparable to wired charging. The built-in small fan actively dissipates heat to keep the temperature of the entire wireless charging process at a lower level. Taken together, this new wireless charger has greatly improved both the fast charging experience and the user experience.
If you need to customized the same specification or similar as this, we can help you develop that and make it more cost-effective than Belkin’s one.