Car Air Purifier Vehicle Ionizer
Multiple functions use
Air purifier / fast charging / broken window
Negative ion
PM2.5
Smoke smell
Built-in negative ion emitter
Two million negative ions per cubic meter
QC3.0 fast charge port
From 0 charge to 100% as need long as 1 hour and 14 minutes
5V/2.4A (black) port output
QC3.0 (blue) port output
Use the product to press to can crush car window
Multiple functions use
1 hour can charging full phone
45 minutes to purification the car
1 second can break the window
Dual USB fast charge
Air purification
Easy to break the window
6 major security protection
Limited space inside the car
These ones all demand put in the car? Such as car charger, spare broken window hammer, carbon pack, air purifier, etc.
Traditional car charger
Single function, low charging efficiency
Broken window hammer
Low frequency of use, can not be found when urgent
Carbon pack
The purification effect is not obvious, not clean, not beautiful
Car air purifier on the market
Price expensive, size large
Multiple ways of using
One is enough
Air purifier / fast charge / broken window
Purify the air and protect health
No need to replace the filter / long use time / good purification effect
Invisible safety hazard in the car
Bacterial virus attached to the steering wheel and button
Air conditioning air outlet, dust, dust mites
Second-hand smoke in the car
Formaldehyde, benzene, etc. produced by interiors such as cushion holsters
Car exhaust
Gasoline smell produced by the engine
Obvious purification effect
Air purification laboratory
Experimental results: 0.5 cubic meters of purification in 5 minutes
Safe fast charge
Intelligent security protection
Overvoltage protection
Overcurrent protection
Over temperature protection
Overcharge protection
Short circuit protection
Overheating protection
QC3.0 port output
3.6V-6.5V/3A,6.5V-9V/2.7A,9V-12V/2A
Charging speed
Fast charge speed, up to 4 times the standard charger, stockpile 80% the charge for devices compatible with QC3.0 technology within 35 minutes
Compatible version
Compatible with all versions of Qualcomm Fast Charge Technology (1.0, 2.0, 3.0)
Can also provide standard charging for non-fast charge devices
When the device is and fast charging after a certain period of time, it will gradually enter the trickle charge, that it can control current overcharge cooperate with the chip to, fully protects charging equipment.
5V/2.4A (black) port output
QC3.0 (blue) port output
Charging will not be hot
It adopts aluminum alloy casing, exquisite aluminum oxidation process, rapid heat dissipation, large diameter ventilation design, not very hot when charging.
QC3.0 fast charge port
From 0 charge to 100% as need long as 1 hour and 14 minutes
The above data is the test result of the millet MIX2 mobile phone under the QC3.0 fast charge protocol.
Use the product to press to can crush car window
Broken window – broken window principle
Car window glass: is sampled tempered glass, generally 3-4mm thick.
Tempered glass features: need to be subjected to a large impact at a point in order to cause the glass to burst open.
Small steel hammer broken window: It is the use of this principle to design the product, instantly pop up a high-hardness alloy steel needle, Impact a point to instantly break the window.
Protection status
Instantaneously popped alloy firing pin dialysis chart
(reusable)
Can quickly break the window
Not easily lost
Product parameters
Brand: MWdao
Material: alloy aluminum / alloy steel / fire ABS
Function: negative ion air purifier, dual USB charging, broken window hammer
Chip: High efficiency DC control conversion chip
Size: 47*39*91
Product weight: 176g
Black ordinary charging port: 5V/2.4A
Blue fast charge port: QC3.0
Will give you a 6mm tempered glass exercise
Package display
Packaging angle display
Design intention
The number of people killed by because vehicles every year has reached thousands, probably speaking. a hundred thousand sets of fast-breaking car window can save a life, we sincerely hope that this product and technology will be popularized as soon as possible.
Just put the product in window position, press to crumble window
